How to apply DampMat
-

- Step 1: Open the door pad
-

- Step 2: Remove the Plastic sheet
-

- Step 3: Remove the Speaker
-

- Step 4: Clean the panel thoroughly
-

- Step 5: Clean the inside panel.
-

- Step 6: Cut the sheet as needed
-

- Step 7: Pre heat the sheet if needed or if the temp is cold and paste it on the Panel
-

- Step 8: Use the roller so the DampMat sticks well to the panel
-

- Step 9: Repeat the same procedure on the outer layer of the door.
-

- Step 10: Use the DampMat’s finishing tape to hide the gum coming out of the edges and will give professional looks